Greenhouse accessories

Factory direct model complete specifications complete processing can be customized

The advantages of galvanized card slot:

1, low processing cost

2, durable

3, high reliability

4, strong coating toughness

5, saving time and labor

years of use 5 -7 years

The card slot is one of the main accessories for the solid film in the greenhouse. The circlip has a plastic circlip, a plastic spring and a galvanized circlip. The use of the card circlip can save plastic and save manpower. ,

Greenhouse Accessories

The company guarantees that the greenhouse facilities are well equipped, inexpensive, and the technology reaches the leading level.

1. The construction of vegetable greenhouses is based on the east-west direction, and the design is based on the highest degree of daylighting;

2, the standard vegetable greenhouse is mainly 8-10 meters wide, 60 -100m long;

3. The stone wall and the east and west walls of the vegetable greenhouse are made of stone building wall, the height of the rear wall, the inner side of the rear wall of the long back slope greenhouse is 4 meters high, and the height of the outer wall is 0. . 8 meters. The height of the ridge at 1.7 meters from the inner side of the back wall is 4.8 meters, and the depth of the foundation should be greater than 0.5 meters.

4. The spacing between the north and south of the vegetable greenhouse design should not be less than 4-5 meters, which cannot affect the vegetable greenhouse behind. Light conditions:

5. The vegetable greenhouse construction angle is between 40-45°, and the post-break length cannot exceed 1.5 meters.

6. The minimum diameter of the cement column or the greenhouse column used in the column structure should not be less than 10 cm, and the column is buried between 0.4-0.5 m.

7, steel For the construction of the frame structure, the joint between the steel frame and the embedded part shall be welded, and the joint of the column shall be tied with a special steel wire;

8. The surface insulation shall be laid to carry the steel wire on the back wall. Bind, tied at a suitable spacing of 10 cm.